UVLED electronic 3C application

Basic Features

1. The bonding of crystal, glass, metal, plastic and various materials has excellent bonding effect;

2. High bonding strength, good transparency, good water resistance and strong peel strength;

3. Flexible formula, no internal stress cracking phenomenon after curing, excellent low temperature resistance, high temperature and high humidity performance;

4. The curing speed is fast, positioning in a few seconds, and reaching the highest strength in one minute, which greatly improves the work efficiency;

5. It is completely transparent after curing, and the product does not turn yellow or white for a long time;

6. It can be applied by automatic mechanical dispensing or screen printing, which is convenient for operation.

Steps for usage

The first step: surface treatment: according to the specific material treatment, the surface is dry and clean, and there is no weak boundary layer.​​

Step 2: Apply shadowless glue: Continue to apply shadowless glue without scattering.​​

The third step: light positioning: low radiation for a short time, and can not be moved by hand.​​

Step 4: Remove the spilled shadowless glue: scrape it off with a knife, gently wipe the spilled glue with a soft cloth and paper towel, you can dip it in acetone alcohol.​​

Step 5: The shadowless glue is completely cured: high radiation for a long time until it is completely cured, be careful not to overheat.​​

Step 6: Cleaning: Gently wipe with a soft cloth/paper towel dipped in acetone alcohol.

Precautions

1. Store away from children.​​

2. Do not pour the glue that has been poured back into the original packaging to avoid contamination of the glue.​​

3. This product contains methacrylic acid and its ester monomers, which are slightly irritating to the skin and eyes. If accidentally splashed into the eyes, please rinse with plenty of water immediately. If there is still discomfort, go to the hospital for examination; Rinse immediately with soap and plenty of water.

Purpose

UV light curing glue is widely used in glass furniture, glass crafts, crystal crafts, electronic scales, electronic components, LCD, LED, mobile phone buttons, medical equipment, plastic craftsmanship, motors, cable production and reinforcement, circuit board coating, Jumper fixing, solder joint protection, coil voice coil fixing, laser head, optical lens, IC card and chip, watch, electronic transparent plastic (PC, PMMA, PS, PVC, PE, ABS, PU, ​​TPU, PET) Fixing, bonding, sealing and pouring etc.